Published at Saturday, February 24th, 2018 - 16:54:31 PM. Bathroom. By Geoffroy Sabrina.
Hit to Read More
Is the water pressure adequate? Run the cold water in the tub or shower and then flush the toilet: If the volume of running water diminishes noticeably, the pressure is low. Do you need a second sink? Is there enough ventilation, or does the bathroom fill with steam and remain damp for hours after every shower? Is the tile around the bath or shower tight or are there signs of deterioration at the corners or at the junction between the tile and the tub or shower base? Use the heel of your hand to exert some gentle pressure on the tile walls at the point where they join the tub or shower pan. Is there any give? Springy tile may indicate the wall has gotten damp and deteriorated over the years. The absence of a grout line and the presence of mold are signs that water may be seeping into the wall cavities.
You know whether your bathroom facilities are adequate or not. But there are other questions you need to ask yourself as you continue your inspection tour. Is there an electrical outlet in the bathroom and, if so, is it a ground-fault interrupter (GFI) receptacle? This is a safety device that functions as a second fuse and will, in the event of a fault in the ground, shut off power to the outlet and prevent electrical shock. They’re recognizable by their small, rectangular reset buttons located between the plug receptacles.
Any content, trademark’s, or other material that might be found on the Iveminorseminary website that is not Iveminorseminary’s property remains the copyright of its respective owner/s. In no way does Iveminorseminary claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Iveminorseminary. All Rights Reserved.